6 12 24 Core Armoured Fiber Optic Cable Steel Wire GYFXTC8 GYXTC8A Self Sustainment

GYXTC8A the fibers,250μm,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The two sides PSP are longitudinally applied over the outer loose tube. Steel wires and loose tubes filled with water proof compound to ensure compact and longitudinally water blocking ,this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene(PE) sheath.

Cable design

• 12/24/48/96 SM-fibers.

• G652D operating wavelength at 1260~1625nm.

• FRP(PE coated) as central strength member.

• Loose buffer tubes SZ-stranded.

• The buffered tube filled with filling compound while the stranded core covered with water blocking tape.

• Aramid yarns and aluminum tape armored.

• PE Cable Outer sheath and messenger wires combined.

• Suitable as: Aerial installation.

Reference Standard

IEC 60793-1, 60793-2, 60794-1

ITU-T G650, G652

Optical and mechanical characteristics of fiber

4 Mechanical requirements and methods of fiber cable

5 Fiber color coding

Each fiber will be identifiable throughout the length of the cable in accordance with the following color sequence. Fiber color in each tube starts from No. 1 Blue.

6 Tube color coding Product Structure Diagram

The loose tubes will be identifiable in accordance with the following color sequence, and each tube with 12 fibers. If there are fillers, the color is natural.

250μM Fiber Optic Cable

Armoured Fiber Optic Cable

GYFXTC8 250μM 12 24 Core Armoured Fiber Optic Cable Images